Abstract

TiO2 aerogels prepared by sol‐gel method and followed by supercritical drying have been annealed at temperatures ranging between 400 and 550 °C. The obtained TiO2 anatase crystallites with the mean size between 6.4 and 13.9 nm, as obtained from transmission electron microscopy measurements, have been further investigated by Raman spectroscopy. It was found that the peak position and full width at half maximum (FWHM) of the TiO2 anatase Raman bands located around 144, 398, and 638 cm−1 are influenced by crystallite dimension. These spectral changes can be assigned to the combined action of several nanosize effects such as phonon confinement, phonon coupling, strain, and stoichiometry defects. Surprisingly, the best discrimination of the FWHM change with the nanocrystallite mean size was achieved for the 638 cm−1 band, whereas the best discrimination for the peak position was found for the 398 cm−1 band. The critical size values obtained from the peak position and FWHM evaluation were between 12.7 and 13.1 nm. Taking into consideration that only the phonon confinement and inhomogeneous strain can induce an asymmetric broadening of the Raman signal, the bands asymmetry was evaluated, and the critical size values of the nanocrystallites were determined to be between 10 and 11 nm. For a symmetric size distribution of TiO2 anatase crystallites with dimensions between 6.4 and 13.9 nm, the obtained result indicates that the phonon confinement contribution to the overall size effects is more than 75%. No evidence about the influence of the phonon coupling and vacancies on the Raman features was observed. The comparison of the data derived from the experimental analysis with those obtained by applying the theoretical phonon confinement model indicates the necessity of developing an improved phonon confinement model. The asymmetry approach can be applied for a great variety of nanostructures, as a measure of the confinement effect. Copyright © 2011 John Wiley & Sons, Ltd.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call