Experimental assessment of the energy performance of a renewable air-cooling unit based on a dew-point indirect evaporative cooler and a desiccant wheel

Abstract

Given the escalating energy consumption in cities worldwide, it is crucial to investigate the utilization of sustainable technologies and renewable energy sources. The number of empirical studies on the energy performance of hybrid air-cooling systems is limited. Therefore, the objective of this work is to experimentally study the energy performance of a novel renewable air-cooling unit. This prototype is mainly composed of a desiccant wheel and a dew-point indirect evaporative cooler to independently control the temperature, humidity, and carbon dioxide levels of indoor air. 64 experimental tests are carried out to fit an empirical model of this renewable air-cooling unit, focusing on outlet air conditions and the coefficient of performance. In addition, several performance indices are developed for desiccant wheel and dew-point indirect evaporative cooler: (i) moisture removal capacity; (ii) moisture removal capacity per unit of electrical power-consumption; (iii) dew-point efficiency and (iv) cooling capacity of dew-point indirect evaporative cooler per unit of electrical power-consumption. The highest values of dehumidification capacity, sensible cooling capacity and coefficient of performance for this renewable air-cooling unit are achieved for the most severe outdoor air conditions, namely 19.02 kg·h−1, 21.49 kW and 11.0, respectively. This work can serve as a reference for research on the feasibility of hybrid air-cooling systems in the scenarios of heat events and climate change world.