Abstract
An experimental apparatus utilizing double cantilever beam specimens loaded with uneven bending moments was developed to study the mixed-mode fatigue crack growth in composites. The approach is suitable when large-scale bridging of cracks is present. To illustrate the testing method, cyclic growth of delaminations in a typical fibre-reinforced polymer composite was investigated under a constant cyclic loading amplitude. Pure mode I, mode II and mixed-mode crack growth conditions were examined. The results, analysed using a J-integral approach, show that the double cantilever beam loaded with uneven bending moments configuration provides a robust approach to investigate the fatigue crack growth of composites for pure mode and mixed-mode cracking. A steady-state crack growth regime was observed for mode I and mixed-mode loading. For mode II loading, steady-state was absent, and a progressively decreasing crack growth rate observed. In addition to details concerning the equipment, a general discussion of the development of cyclic bridging laws for delamination growth in the presence of large-scale bridging is provided.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
