Abstract
Wear and corrosion resistant amorphous/nanocrystalline Fe-Cr-Nb-B coatings have been successfully synthesized by high velocity oxygen fuel in previous works. These coatings show excellent wear resistance and superior corrosion resistance. However, the phase evolution during cooling of the new alloys in the Fe-Cr-Nb-B system is not well understood. In addition, commercial thermodynamic databases for Fe-based alloys do not fully describe the system at the composition ranges of interest. In the present work, the phase evolution of as-melted Fe51Cr10Nb20B19 alloy was investigated by combining detailed microstructural characterization with thermodynamic evaluation using a database developed for the Fe-Nb-B system. The solidification path starts with the formation of (Fe,Cr,Nb)3B2 diboride phase, followed by the formation of austenite at lower temperature. On further cooling, the remaining liquid transforms eutectically to (Fe,Cr)NbB boride and austenite. In the solid-state region, the austenite transform allotropically to ferrite. At even lower temperature, there exists a peritectoid-like transformation, where the (Fe,Cr)NbB boride nucleates both at ferrite grain boundaries and around the existing (Fe,Cr,Nb)3B2 diboride. Thermodynamic calculations showed good agreement with experimental observations, opening new possibilities to guide future alloy development in the Fe-Cr-Nb-B quaternary system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
