Abstract

Among thermally-activated heat pumps, absorption-resorption heat pump (ARHP) is dominant by the ability of combining with low-temperature heat for efficient space heating. In this work, an ARHP experimental prototype is developed based on the previous thermodynamic cycle and tested to obtain the operation details such as coefficient of performance (COP), supply water temperature, heating capacity and so on. The experimental and the previous theoretical results are compared and mutually verified. The exact performance of the solar-assisted ARHP heating system is then investigated and compared with that of the conventional vapor compression heat pump (VCHP) in terms of primary energy ratio (PER) and primary energy saving ratio (PESR). The experimental results show that the COP increases greatly from 1.125 to 1.353 when the heat source temperature increases from 90 °C to 150 °C at the ambient temperature and return water temperature of 0 °C and 30 °C, respectively. Under given conditions, the measured heating capacity reaches a maximum value of 18.5 kW, 9.0 % lower than the rated value. The theoretical results reveal that solar fraction above 30 % can make PER of the solar-assisted ARHP heating system comprehensively greater than that of the reference VCHP system. Optimal solar contribution to space heating can be achieved based on the proposed ARHP if solar heat is dividedly utilized in its temperature zones of 10–35 °C, 35–83 °C and above 83 °C.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call