Abstract
The modified Johnson-Cook (MJC) material model is widely used in simulation under high-velocity impact. There was a need to estimate a strain rate parameter for the application to the impact analysis, where the method typically used is the Split Hopkinson bar. However, this method had a limit to the experiment of strain rate. This study proposed to estimate the strain rate parameter of the MJC model based on the impact energy and obtained a parameter. The proposed method of strain rate parameter calculation uses strain parameters to estimate from the drop weight impact and high-velocity impact experiments. Then, the ballistic experiment and analysis were carried out with the target of the plate and cylindrical shape. These analysis results were then compared with those obtained from the experiment. The penetration velocities of plates could be predicted with an error of a maximum of approximately 3.7%. The penetration shape of the cylindrical target has a similar result shape according to impact velocity and had an error of approximately 6%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
