Abstract
The ring-ribbed tank is the key equipment of cooling system of deep-sea manned submersible. The heat transfer characteristics of the outer wall and the heat transfer and flow characteristics of the inner flow channel of the ring-ribbed tank for different inlet and outlet temperatures and flow rates were studied through a water tank test. The results indicate that Nusselt number for the inner flow channel correlates with Reynolds and Prandtl numbers, while for the outer wall, it correlates with Grashof and Prandtl numbers with an overall error within 5%. A numerical study using the Realizable k-ε turbulence model and Boussinesq approximation of the flow-solid conjugate heat transfer is conducted, which can accurately determine the heat exchange capacity and the import and export differential pressure with an average relative error of 1.98% for hot water temperature and 7.73% for shell wall temperature. Additional simulations for determining the heat transfer capacity and flow resistance characteristics of the ring-ribbed tank in open water results demonstrate that the differential pressure and its coefficient are basically consistent with model test results. The cooling system can achieve a heat transfer rate of up to 17 kW with an external seawater flow velocity of approximately 2 knots.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
