Experimental and numerical study on the dynamic mode III fracture behaviors of rock using an axially notched flattened Brazilian disc in SHPB tests

Abstract

The dynamic mode I and mode II fracture of rock have been widely investigated over the past decades. However, the lack of dynamic mode III fracture testing method and the rare understanding of mode III fracture mechanism of rock remain a significant knowledge gap in the realm of rock mechanics. In this work, an innovative axially notched flattened Brazilian disc (ANFBD) sample is proposed for the mode III fracture tests of rocks using the split Hopkinson pressure bar (SHPB). Firstly, the optimal geometrical dimension of the ANFBD sample for achieving true mode III fracture of rocks is comprehensively discussed using finite element method (FEM) analysis. Then, the reliability of ANFBD-SHPB method is experimentally verified through dynamic mode III fracture experiments on the Fangshan marble (FM). Laboratory experimental results show that the mode III fracture toughness (KIIId) values of FM are approximately 2.8 times of the mode I fracture toughness (KId) values at similar dynamic loading rates. Post-mortem examinations on the fracture surfaces show that the famous facet coarsening mechanism in mode III fracture is suppressed under high loading rates. Furthermore, insightful assessments regarding the inner progressive fracturing behaviors of the ANFBD sample are given by virtue of three-dimensional discrete element method (DEM) simulation. Moment tensor (MT) analysis indicates that the shear fracture mechanism mainly dominates the whole failure process of the ANFBD sample, while the tensile fracture mechanism slightly increases during the facet coarsening process. These results are of significant importance for revealing the failure mechanism of rock under dynamic mode III loading and give some beneficial implications for natural strike-slip fault structures.