Abstract
This research discusses the experimental study of free decay test This research discusses related to the experimental study of free decay test motion roll on the catamaran floating crane structure which is reviewed from free-floating and moored conditions. Experiments were conducted on the facilities of Maneuvering and Ocean Engineering Basin owned by the BTH – BPPT. The structure used as an experiment was a model of the catamaran floating crane with a scale of 1:36. The test is carried out with a horizontal mooring link system Taken from mooring system modelling, spring stiffness is used as a reference for mooring rope stiffness in numerical analysis. The analysis carried out in this final project is to compare the experimental results of the decay test with the results of the analysis using Moses software. From the results of the experiments obtained a comparison of free-floating conditions to tethered to decay tests of 38%, 8%, and 9% for linear damping values, then 93%, 12%, and 13% for quadratic damping values. Comparison of experiment results to numerical results found a difference of 128.39% for decay test 1 for quadratic damping value, then in decay test 2 and decay test 3 against the numerical got difference of 60.80% and 66.83% in linear damping value.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Offshore and Coastal Engineeing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.