Abstract
In this research the 3-D transient non-linear thermal analysis of the hard-facing process was performed by using the experimental testing and finite element method. Testing was done at three different carbon steels and the obtained results were compared to one obtained by empirical formulas and welding recommendations. Experimental testing was done on hard faced specimens (plates) with different thickness. Temperatures and temperature cycles was measured by using thermocouples in order to determine maximal temperature and cooling time between 800?C and 500?C. After experimental testing the finite element method analysis was done. The simulations were executed on the open source platform Salome using the open source finite element solver Code Aster. The Gaussian double ellipsoid was selected in order to enable greater possibilities for the calculation of the moving heat source. The numerical results were compared with available experimental and mathematical results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
