Abstract
Hydrodynamics of aerated slurry is studied experimentally and numerically using the example of thiosulphate leaching of gold concentrate. The studied milled concentrate has shear-thinning fluid rheology and it was imitated by water-based solutions of CMC. Presence of electrolytes, as in the case of the leaching slurry, has great influence on bubble size distribution. Primary phase flow is measured by Particle Image Velocimetry. Local gas hold-up in aerated CMC 50000 (0.15 w%) solution is measured by Electrical Impedance Tomography. Volumetric mass transfer is measured by dynamic method in different CMC solutions over a range of operational conditions in absence and presence of electrolytes. The experimental data was used in CFD modelling of the aerated slurry. Single phase hydrodynamics of shear-thinning fluid (CMC 50000 (0.15 w%)) have been modelled and validated against experimental data with reasonable agreement. Multiphase mixing of the thiosulphate slurry was modelled with the assumption of constant bubble size. The results of the simulations and measurements are presented and discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Chemical Engineering & Process Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
