Abstract
Photovoltaic modules are impacted by overheating, which degrades their conversion efficiency and shortens their lifespan. This work attempts to study the cooling potential for a hybrid photovoltaic/thermal (PV/T) system by employing CuO and Fe2O3 nanofluids with 0.2% and 0.3% volume fractions (φ), circulated in a heat exchanger attached at the rear side of the PV module to lower the temperature of the PV cells and improve its energy and exergy efficiencies. Consequently, a 2D numerical model was analysed given the energy balance across the PV/T system layers, which is evaluated in line with measured experimental data. The results indicate that the successfully synthesised nanomaterials could improve the performance of the nanofluids and increase the heat exchange between PV/T system layers, reducing the PV cells’ temperature by 23.49% and 34.58% when cooling by CuO and Fe2O3 nanofluids at φ=0.3%. Compared to the uncooled PV module, the electrical efficiency has increased by 9.21% and 10.30%, while thermal efficiency increased by 38.9% and 43.3% under cooling with CuO and Fe2O3 nanofluids, respectively. Thereby, the exergy destruction (exergy losses) and entropy generation have decreased by about 26% and 68% when cooling with Fe2O3 nanofluid, which improved the exergy efficiency by 13% more than CuO nanofluid.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.