Experimental and Numerical Studies on the Vibration of Hybrid Composite with an Edge Crack

Abstract

The hybrid composite plate is increasingly used in marine, robotic arm, and other applications. Edge crack is the greatest common fault in the structural systems during its working time. In this research, the successful fabrications of a hybrid composite of epoxy-based composites reinforced with bamboo and glass fibers have been done to examine the vibration characteristics under free vibration. First-order shear deformation theory is used to study the fundamental natural frequencies of asymmetrically hybrid composite beam with edge cracks for cantilever beam boundary conditions. Both numerical (FEM) using ABAQUS software and experimental investigations are done for the vibration analysis of unidirectional bamboo/glass fiber epoxy hybrid composite (BGHC) beam with edge cracks using fracture mechanics theory. It is observed that implications edge crack with different crack depth and various fiber weight ratio parameters have a major effect on vibration analysis. Also, it is clear that the natural frequencies of the hybrid composite are significantly affected due to the fiber weight ratio and crack depth of the hybrid composite materials. So, crack lengths are playing a vital role in the dynamic or vibration characteristics of the hybrid composite materials. The results of natural frequencies have been shown that they are decreased with an increase in crack depth and an increase in the bamboo fiber weight. Thus, BGHC-2 made from 30% bamboo and 10% glass fiber can be a viable candidate for applications that will produce good vibration properties. Generally, the first-third natural frequency of the hybrid composite beam decreases within the increase of bamboo fiber and decreases in glass fiber. The composite materials having 60% of epoxy with 20% bamboo and 20% glass fiber, and 60% of epoxy with 10% glass and 30% bamboo fibers, are observed with a gradual decrease in the values of natural frequencies with respect to increasing in crack depth. A fine agreement was accomplished between the simulation and experimental results. Therefore, the present approach can be used to identify cracks for mechanical health monitoring by linking the variation in natural frequencies of the hybrid composite beams.