Experimental and numerical studies on the low‐velocity impact response of carbon fiber‐reinforced polymer anisogrid cylindrical shells

Abstract

AbstractThis work presents the experimental and finite element (FE) simulations to investigate the behavior of both unstiffened and anisogrid composite cylindrical shells subjected to low‐velocity axial impact. Impact damage has been an epidemic problem for composite structures. Even subjected to a low‐velocity impact, thin‐walled composite structures may sacrifice its load‐carrying capacity considerably due to various modes of failure. A low cost, reliable and innovative manufacturing process is proposed for the production of anisogrid cylindrical lattice structures. Initially, test coupons are fabricated as per American Society for Testing of Materials (ASTM) standards and inspected using infrared (IR) thermography to find the imperfections incurred during fabrication. The test coupons without defects were only taken into account for material characterization. FE simulations were carried out on both the unstiffened and anisogrid shells using LS‐DYNA® for a series of low‐velocity impacts. Also these shell structures were subjected to impact loading experimentally for the validation of the numerical results. The results of these studies indicate that the anisogrid model presented in this work possesses a great load‐carrying capacity than an unstiffened shell under dynamic loading conditions, also the weight of the structure has been reduced up to 51.27%. Numerical simulation results are in good agreement with the experimental data, having less than 11.56% of maximum deviation on the energy absorption value.