Experimental and Numerical Studies on the Drift Velocity of Two-Phase Gas and High-Viscosity-Liquid Slug Flow in Pipelines

Abstract

Abstract Objectives/Scope Drift velocity for two-phase air and high viscosity oil has been studies in depth, in this research. The drift velocity is one of the key parameters used in the prediction of gas-liquid two-phase flow hydrodynamic behavior. Improvement on the drift velocity closure relationship allows a better design for pipelines and wellbores system that experience two-phase flow phenomena. Methods, Procedures, Process Researchers have relied on empirical correlations as a means to predict the drift velocity. These empirical correlations have been limited to the flow of gas and low viscosity (20 cp and lower) liquid. In this study, the effect of drift velocity on gas and high viscosity two-phase flow in pipelines have been investigated. Drift velocity experiments and numerical calculation were carefully performed. A well-designed 1.5-in internal diameter flow loop facility with the capability of pressure drop and liquid holdup measurement was used for this drift flux velocity measurement. Various computational intensive simulations for drift velocities have been performed. Results, Observations, Conclusions A new empirical correlation was developed for the prediction of the drift velocity in horizontal and near horizontal pipelines. The effects of inclination and pipe diameters have been accounted for in the new correlation which increase its range of applicability. Novel/Additive Information The correlation was validated and compared with other existing drift velocity correlations and experimental data. The new closure relationship allows a significant improvement on the pressure drop prediction for the cases of two-phase gas and high-viscosity-liquid flow in pipe. This enable the transient calculation for subsea pipeline transporting gas and high-viscosity oil by using a drift flux model.