Abstract
*† ‡ The effects of spectral radiation absorption on the flame speed at normal and elevated pressures were experimentally and numerically investigated using the CO2 diluted outward propagating CH4-O2-He flames. Experimentally, the laminar burning velocities of CH4-O2He-CO2 mixtures at both normal and elevated pressures (up to 5 atm) were measured by using a pressure-release type spherical bomb. The results showed that radiation absorption with CO2 addition increases the flame speed and extends the flammability limit. In addition, it was also shown that the increase of pressure augments the effect of radiation absorption. Computationally, a fitted statistical narrow-band correlated-k (FSNB-CK) model was developed and validated for accurate radiation prediction in spherical geometry. This new radiation scheme was integrated to the HLLC Riemann solver for radiation prediction in a compressible reactive flow. The comparison between experiment and computation showed a very good agreement. The results showed that the flame geometry had a significant impact on radiation absorption and that the one-dimensional planar radiation model was not valid for the computation of the flame speed of a spherical flame. It was clearly demonstrated that the effect of radiation absorption increases with the pressure and flame size. An effective Boltzmann number was extracted from numerical simulation. Furthermore, the FSNB-CK model was compared with the grey band SNB model. It was shown that the grey band SNB model over-predicts the radiation absorption. It is concluded that any quantitative prediction of flame speed and flammability limit of CO2 diluted flame requires accurate spectral dependent radiation model.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.