Abstract

A laboratory model of a single pile embedded in Nanyang expansive soil and subjected to water infiltration is applied in this study to examine the interaction between the expansive soil and pile foundation upon water infiltration. The soil matric suction decreases as a result of the rising soil-water content. The amount of soil ground heave reaches its peak of 10.7 mm after 200 hours of water infiltration. As matric suction decreases, pile shaft friction also declines, which causes more of the load at the pile head to be carried by the pile base resulting in more pile settlements. A new numerical simulation method is provided to simulate this issue by coupling the subsurface flow, soil deformation, and hygroscopic swelling to investigate the expansive soil-pile response upon water infiltration. From the numerical simulation model, hygroscopic strain arises as a result of elevated moisture levels resulting from the entry of water, and due to ground heave and the mobilization of lateral soil swelling, the shear stress at the interface between the soil and the pile gradually increases over time. It reaches its maximum value of 4420 Pa at upper depths around 200 hours after the infiltration. The comparison between the lab model testing data and the numerical model results demonstrates a good level of concurrence.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.