Experimental and numerical investigations on load-carrying capacity of dowel-type bolted bamboo joints

Abstract

Bamboo has been widely used for structural and non-structural purpose, for example as scaffolding and cladding for many centuries in South East Asian countries such as China and India, due to its high strength-to-weight ratio, low price and recyclability. In today’s trend of sustainable development, there is a renewed interest in the use of bamboo for modern prefabricated structures. In this paper, dowel-type bamboo joints are introduced for prefabricated bamboo structures. An experimental study has been undertaken to investigate the structural behaviour and the failure mechanisms of the dowelled joints with varying configurations. Test results reveal that the ductile failure mode of the bamboo occurred when large end spacing was applied, and the infilling grout can significantly increase the load-carrying capacity of the dowelled joint. Three-dimensional finite element models were established and validated using available experimental data. Extensive parametric studies were carried out based on the simulation approach to investigate the effects of key influencing variables involved, i.e. hole clearance, friction coefficient, bolt strength, bamboo thickness, grout strength and end spacing. Moreover, analytical models for designing the dowelled joints are proposed and compared with the current codified approach.