Experimental and numerical investigation on the dynamic characteristics of thick laminated plant fiber-reinforced polymer composite plates

Abstract

Although considerable attention has been devoted to the experimental research works of plant fiber-reinforced composites, theoretical determination of their structural characteristics is also much needed one in their evolution. But it is still considered as a difficult process due to the several factors such as short and discontinuous fiber form, plant fiber’s intrinsic characteristics, fiber anisotropy and porosity. In this study, vibration characteristics of woven jute/epoxy and woven aloe/epoxy laminated composite plate structures are investigated theoretically and experimentally. The elastic constants of the woven jute/epoxy and woven aloe/epoxy laminated composites are obtained through experimental testing. The governing differential equations of motion for the uniform woven jute/epoxy and woven aloe/epoxy laminated thick composite plates are carried out using the p-version finite element method based on higher-order shear deformation theory. The effectiveness of the developed finite element formulations is demonstrated by comparing the natural frequencies obtained using the present finite element method with those obtained from the experimental measurements. Also a comparative study is carried out between the results of h-version FEM and p-version FEM to check their accuracies and efficiencies. The effects of aspect ratio and angle of fiber orientation under various end conditions on the free vibration responses of the woven jute/epoxy laminated composite plate are also investigated. The forced vibration response of the woven jute/epoxy laminated composite plate under the harmonic force excitation is carried out under various end conditions.