Abstract
Fiber-reinforced polymer (FRP) is a practical approach to delay or even suppress the deformation of steel structures. However, their application has been constrained by brittle damage and low strengthening efficiency. This paper presents an investigation of the mechanical behavior of short circular hollow section (CHS) steel columns restrained with hybrid fiber-reinforced polymer (HFRP) composed of carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) under axial compression. The results show that the restraint effect of HFRP composed of one layer of transverse CFRP as the middle layer and two layers of transverse GFRP as the inner and outer layers is better than two layers of transverse CFRP, with peak load and ductility increased by 7.29 % and 12.36 % over the latter. Then, a simplified method for simulating HFRP and single FRP restrained short CHS steel columns is proposed and verified by experimental results. Moreover, a parametric study is performed to discuss the effect of the diameter-to-thickness ratio on the bearing capacity. Finally, a universal method is proposed to calculate the ultimate bearing capacity of HFRP and single FRP restrained short CHS steel columns, for which the average error and standard deviation from the measured values are 2.27 % and 0.024, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
