Experimental and numerical investigation of the flexural behavior of one–way RC slabs strengthened with near–surface mounted and externally bonded systems

Abstract

This study investigated the flexural performance of one-way reinforced concrete (RC) slabs strengthened with two distinct strengthening systems: near–surface mounted (NSM) bars and externally bonded (EB) carbon fiber-reinforced polymer (FRP) strips. The NSM bars comprised four types: carbon FRP (CFRP), basalt FRP (BFRP), glass FRP (GFRP), and stainless–steel (SS) bars. The NSM–strengthened slabs showcased substantial enhancements in yield and ultimate load capacity, ranging from 20 % to 55 % and 59–123 %, respectively. In comparison, those strengthened with EB–CFRP strips displayed increases from 46 % to 107 % and 45–177 %, respectively, depending on the axial stiffness ratio of the strengthening system provided. Furthermore, the slabs reinforced with NSM–BFRP bars showed an 11–25 % improvement in their ductility indices. In contrast, the slabs reinforced with EB experienced a decrease in ductility ranging from 38 % to 50 %. This reduction was attributed to the differences in the modes of failure observed in both strengthening systems. The rupture of the NSM–FRP bars and the strain readings associated at the end of testing confirmed that the tensile strength of the NSM–FRP bars was fully exploited whereas the EB–CFRP strips utilized only 29–36 % of their ultimate tensile strain due to debonding. A finite element (FE) model was formulated to anticipate the behavior of the strengthened slabs. A strong correlation between the numerical predictions and the experimental outcomes was observed. The experimental–to–numerical ratios of the ultimate load ranged between 1.0 and 1.08 for the NSM–strengthened slabs and between 0.98 and 1.38 for the EB–strengthened slabs. This validated the FE models’ ability to capture the nonlinear performance of the strengthened slabs.