Abstract
Abstract : The need for low thrust propulsion systems for maneuvers on micro- and nano-spacecraft is growing. Low thrust characteristics generally lead to low Reynolds number flows from propulsive devices that utilize nozzle expansions. Low Reynolds number flows of helium and nitrogen through a small conical nozzle and a thin-walled orifice have been investigated both numerically, using the Direct Simulation Monte Carlo technique, and experimentally, using a nano-Newton thrust stand. For throat Reynolds number less than 100, the nozzle to orifice thrust ratio is less than unity; however, the corresponding ratio of specific impulse remains greater than one for the Reynolds number range from 0.02 to 200. Once the Direct Simulation Monte Carlo model results were verified using experimental thrust and mass flow data, the model was used to investigate the effects of geometrical variations on the conical nozzle's performance. At low Reynolds numbers, improvements to the specific impulse on the order of 4 to 8% were achieved through a combination of decreasing the nozzle length and increasing the nozzle expansion angle relative to the nominal experimental geometry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.