Abstract

In this study, the influences of crack parameters like crack location from the left end, crack height, number of cracks and the magnitude of mass and the velocity of the transit load on the vertical displacements of the cracked simply supported beams subjected to transit mass are investigated. The transverse open cracks with numerous damage scenerios are considered for the mathematical modelling of the system. The governing equations of motion for the system have been obtained and the equations have been solved by the help of Duhamel integral technique. The theoretical formulation has been exemplified with numerical studies. By utilizing ANSYS Workbench 2020, transient structural analysis has been carried out. The mode shapes and the frequency ratios of damaged simply supported beam have also been determined. To validate the numerical and FEM models, the experiments with damaged beams have been carried out in the laboratory. It has been proven that the results of the theoretical and FEM models are well convergent with the experimental data. The results gathered from the numerical analysis, FEA as well as experimental study have been presented with comparative graphs and tables. The outcomes of the examinations have been interpreted in the conclusions part. It has been observed that subject parameters are of considerable significance on the time dependent response of the cracked beams.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.