Abstract

Purpose The purpose of this paper is to analyse an actual representation of ice accretions, which are important during the certification process. Design/methodology/approach Ice accretion experiments are conducted in a low-speed subsonic wind tunnel testing facility to evaluate the influence of various ice shapes around the airfoil sections. Ice accumulation changes the shapes of local airfoil sections and thereby affects the aerodynamic performance characteristics of the considered NACA 23012 profile. The ice profiles are impregnated using balsa wood with glace, horn and mixed ice accretion cases for the detailed experimental investigation. Findings Computational fluid dynamics analysis is done to compute the influence of different ice shapes on the aerodynamic coefficients (Cl and Cd) while ice accretion occurs at the leading edge of the airfoil sections. It is observed that the Cl and Cd modified immediately more than 40% as compared to the clean wing configuration. In the same fashion, the skin friction coefficient also abruptly changes for different ice shapes that have the potential to induce flutter at the critical speed of the airplane. The computational solutions are further validated through wind tunnel experiments and recent literature concerning certification for flight in icing conditions. Social implications The ice accretion study on the aerodynamic surfaces can also be extended for wind turbine blades installed at different cold regions around the globe. Further, the propeller icing influences the entire rotorcraft aerodynamics at low temperature conditions and the findings of this study are strongly connected with such problems. Originality/value The aerodynamic characteristics of the baseline airfoil are greatly affected by the ice accretion problem. Although flight through icing condition endures for a short duration, the takeoff path and decision speed are determined based on airplane drag as per federal aviation regulations. Hence, the proposed study is focussed on a cost-effective approach to predict the effect of ice accretion to achieve optimum performance.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call