Experimental and computational chemical studies on the corrosion inhibitive properties of metamizole sodium pharmaceutical drug compound for CS in hydrochloric acid solutions

Abstract

The effect of sodium metamizole as a corrosion inhibitor for carbon steel (CS) in 1 M hydrochloric acid at various concentrations was studied by using chemical (weight loss, WL) and electrochemical [electrochemical frequency modulation (EFM), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP)] methods. The results of WL showed that the effectiveness of sodium metamizole as a CS preservative in a hydrochloric acid solution at room temperature raised by improvement of the concentration of the inhibitor and reached 82.87% at 300 ppm and 25 °C. The effect of temperature on the CS was studied and the thermodynamic parameters of activation and adsorption were computed and discussed. The results showed that the inhibition efficiency (IE) decreases with increasing temperature, suggestive of physisorption. This was collaborated by values of activation energy, which are all below 80 kJ mol−1 and free energy which are below 20 kJ mol−1. The adsorption mechanism was coherent with Langmuir adsorption model. Results of the PDP revealed that the inhibitor was adsorbed on CS surface by mixed type of behavior. Furthermore, EIS revealed the dip in the values of double-layer capacitance and improvement in the charge transfer resistance with increased dose of sodium metamizole. Surface examinations were performed using altered techniques. The theoretical studies were calculated to confirm the validity of the practical results and the results of both were compared with each other, demonstrating the validity of the results obtained.