Experimental and analytical studies of steel joint components at elevated temperatures

Abstract

AbstractThis paper reports on experimental furnace testing and development of simple analytical models intended to initiate the development of a Component Method for modelling of steel beam‐to‐column connections in fire conditions. The basic theme of the Component Method is to consider any joint as an assembly of individual simple components. Each of these components is simply a non‐linear spring, possessing its own level of strength and stiffness in tension, compression or shear, and these will degrade as its temperature rises.The main objective of this study was to investigate experimentally and analytically the behaviour of tension and compression zones of end‐plate connections at elevated temperatures. A series of experiments has been carried out, and these are described in the paper. Simplified analytical models of the component behaviour have been developed, and these have been validated against the tests and against detailed finite element simulations. The simplified models have been shown to be very reliable for this very common type of joint, although similar equations will need to be developed for other configurations. The component models developed have been shown to produce moment‐rotation curves which correlate well with the results of previous furnace tests on complete connection behaviour in fire. The principles of the Component Method can be used directly in either simplified or finite element modelling, without attempting to predict of the overall joint behaviour in fire. This will enable semi‐rigid behaviour to be taken into account in the analytical fire engineering design of steel‐framed buildings, for which it is inadequate simply to consider the degradation of the ambient‐temperature moment‐rotation characteristics of a joint without taking account of the high axial forces which also occur. Copyright © 2004 John Wiley & Sons, Ltd.