Abstract
In this study, the main goal of this study was to understand the effect of carbon nanotube (CNT) additives on the elastic behaviors of textile-based composites. The materials have three phases: carbon fiber fabric, epoxy matrix, and carbon nanotubes. Different weight fractions of CNTs were used (0% as a reference, 0.3%). Mechanical tests were performed, such as tension and three-point bending beam tests. In addition, the composite material damages were examined in detail. The experimental results show that the samples with CNT carried 9% and 23% more axial tensile force and bending capacity on average than those with NEAT. Besides, it was understood that adding 0.3% by weight of MWCNT increases the tensile modulus by approximately 9%. Finally, the mechanical tensile and bending tests are supported by analytical solutions successfully applied in the literature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
