Experimental and Analytical Investigation of a RC Wall with a Gabion Cushion Subjected to Boulder Impact

Abstract

An experimental investigation involving the use of a full-scale pendulum device to deliver solid object impact on a reinforced concrete (RC) barrier specimen that was fitted with a layer of gabion cushion is reported in this paper. The deflection behaviour of the stem wall of the RC barrier including the tensile strains developed in the longitudinal reinforcement was of interests. Results recorded from the tests are compared with results from control experiments which were without the protection of any cushion materials. The introduction of a layer of cushion is shown to be able to have the contact force reduced by more than 95% and deflection demand reduced by about 70%. An analytical procedure employing the Hunt and Crossley contact model, Swiss code model and two-degrees-of-freedom (2DOF) system modelling technique is presented for calculating the flexural response behaviour of the cushioned barrier and validated by comparison with experimental measurements. An important outcome from the study is a simple hand calculation procedure featuring the use of a closed form expression along with a design chart which is illustrated by a worked example, to facilitate uptake in design practices.