Abstract

The Brillouin backscattered wave was examined in a short-length single-mode fiber at different ambient temperatures using a 1553-nm wavelength laser source. To obtain Brillouin scattering depending on the temperature change in a 95-m long single-mode fiber cable, the Brillouin optical time domain reflectometry (BOTDR) technique was used. In this technique, a 1553 nm wavelength signal was sent from one side of the test fiber. The FC/APC connector was attached to the other end of the test fiber. The temperature parameters of the single-mode fiber cables of different brands and types can be obtained using Brillouin scattering. The Brillouin frequency shift is found 0.93 MHz/$^{\circ}$C. Measured linear change demonstrated its use as the temperature sensor of Brillouin Scattering.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.