Abstract
The paper presents an experimental analysis of the state of stress, free supported on the edge of a steel – titanium circular perforated plate loaded with a centrally concentrated force, created in the technological process of explosion welding. For this purpose, a special test stand was designed and a methodology for testing the perforated plate was developed. Resistance strain gauges were used to measure the state of strain. The load was applied in the center of the plate to a pressure stamp. As a result of the research, the values of radial, circumferential and equivalent von Mises stress were obtained as a function of the radius of the plate perforation circle and its load. The stress distribution topography revealed the zones of maximum stress of the steel – titanium perforated plate. The proposed method of experimental research can be used by engineers to verify the state of stress, e.g. in the designed tube sheet walls of reactors for ammonia synthesis.
Highlights
I n the work of a designer, a frequent problem is the proper determination of the level of stresses and strains
An experimental verification of the mathematical model obtained in [9] is presented in [10], where the methodology of experimental tests was developed, which would allow to determine the value of stresses in perforated plates loaded centrally by concentrated force
The axially symmetrical perforated plate has been bent with a concentrated force applied centrally
Summary
I n the work of a designer, a frequent problem is the proper determination of the level of stresses and strains. The assessment is based on the material effort determined by the states of stress and strain. Research on these states can be carried out on real objects, as well as on their models made of various materials. On the basis of these tests, information is obtained that allows for a possible improvement of a structural element and for checking its behavior under operational loads [1]. An experimental verification of the mathematical model obtained in [9] is presented in [10], where the methodology of experimental tests was developed, which would allow to determine the value of stresses in perforated plates loaded centrally by concentrated force. Based on the measured deformation values, the values of radial, circumferential and equivalent von Mises stresses in the plate were
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.