Abstract

The rheological properties of concrete and pre-stressing steel have a significant influence on the deformation and pre-stress losses of p.c. members and thus affect their long-term deflection and service behaviour. Long-span concrete bridge girders can be particularly sensitive to pre-stress losses as the dead load is large compared to the total load. Some observations of excessive long-term deflections have been made of long-span pre-stressed concrete box girder bridges over the last few years. This has led some researchers to question the reliability of the available theoretical models to provide correct long-term predictions. The main results of experimental tests conducted on 9 concrete bridge box-girders with a span of 35m are presented in this work. The girders, which were part of an Italian motorway bridge dismantled after 40years of service life, were tested up to failure with a specially built test frame. The mean deformation measured over five zones of each beam allowed the effective stress in the pre-stressing tendons to be evaluated for a total of 45 zones. Finally, the experimental data have been compared with theoretical predictions obtained by applying both the rules of an international standard (Eurocode 2) and a refined analytical model that takes into account the presence of two types of concrete with different properties as well as the various stages of the construction and pre-stressing.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.