Abstract
The impact of loads on machine foundations is a typical cause of vibrations in industrial applications. Typically, these foundations will transfer vertical dynamic loads to the surface, which will result in earth vibrations that may cause structural damage to nearby structures. Dynamic impacts can vary from significant failure of sensitive sensors or systems to evident structural damage. The current work investigates the behavior of saturated clay soil under a single impulsive load. Deflectometry via falling weights was conducted to produce single pulse energy by dropping different weights from various elevations. The reactions of soils at various places were investigated (vertical displacement at topsoil surface). Such reactions consist of displacements, velocities, and accelerations caused by the impact occurring at the surface depth. The maximum displacement reaction of stiff soil was reduced by 80% in comparison with soft soil under the same impact load. The average percentage of change for stiff soil was 49% larger than for soft soil, as a result of kinetic energy caused by an increased contact surface. Maximum displacements increased with increasing operational frequency and dynamic load.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Engineering, Technology & Applied Science Research
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
