Experimental analysis of boron dilution transient flow mixing characteristics based on planar laser induced fluorescence measurement

Abstract

In Reactor Pressure Vessels (RPV), flow mixing between high and low concentration coolants will cause uneven distribution of boric acid. Severe cases will lead to boron dilution transient and re-criticality safe operation accident. Therefore, accurate measurement of coolant flow mixing characteristics and boron concentration distribution in RPV and study of the mechanism affecting the mixing process are of great significance to improve reactor operation safety. Based on the structural characteristics of large advanced pressurized water reactor pressure vessel, a large-scale visual experimental device was built by 1:6 scale modular design. Optical path correction scheme is used to solve the problem of optical path distortion existing in PLIF technology, and improved ratio calibration method is used to reduce the experimental error of concentration field distribution measurement. Flow mixing process and boron concentration field distribution in pressure vessel under single loop conditions were obtained based on plane laser induced fluorescence technique (PLIF). The influence of Reynolds number on boron diffusion behavior was studied. The experimental results show that during single loop operation, the localized eddy current formed in the left area of the lower head will result in a high concentration retention zone and a V-shaped boric acid concentration distribution in the core. With the increase of the ratio of cold tube flow to injection flow, the time when the high concentration coolant reaches the core hardly changes with the boric acid solution flow rate. The mixing diffusion behavior of boron concentration is the best when the ratio of injection to Reynolds number in the cold tube is at a certain value.