Abstract
SummaryBecause of geometric nonlinearities, vibrations in two horizontal directions can generate a torsional moment that induces a torsional response, even in a structure with no eccentricity; we term this phenomenon Q–Δ effect. In this study, the torsional response caused by the Q–Δ resonance was investigated by performing a shaking table test that involves a single‐layer symmetric specimen. The specimen was designed and fabricated by focusing on one of two resonance conditions. Its moment of inertia was adjustable by changing locations of weights, and the natural frequency in the torsional mode could be modified. We developed a numerical model of the specimen, in which the columns connected to the slab were integrated into an elastic Euler beam. It was confirmed that the torsional response increased near the predicted Q–Δ resonance point. In addition, the acceleration at the corner of the slab was significantly increased. The formulated equations of motion provided a better prediction of the actual phenomena. Because the specimen corresponds to a stiff and slender high‐rise building when converted into a full scale, the result suggests a need to be aware of the risk of torsional response increase due to the Q–Δ resonance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Structural Design of Tall and Special Buildings
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
