Expansion ratio effects on the separated shear layer and reattachment downstream of a backward-facing step

Abstract

Experiments were carried out to study the behavior of the incompressible turbulent separated shear layer and subsequent reattachment, downstream of a backward-facing step in a channel. The main objective of the study was to determine the effect of the expansion ratio on the development of the mean velocity and turbulence intensity in the shear layer and on the evolution of wall static pressure downstream of the step. The step height-to-upstream channel height ratio was varied between 0.5 and 2.13 while all inlet conditions were kept constant. Both hot-wire anemometry and frequency shifted laser Doppler anemometry were used for the velocity measurements. The Reynolds number based on free stream velocity and channel height upstream of the step was 16,600. The expansion ratio was found to have a particularly strong influence in the development of the turbulent, separated shear layer. Larger step height-to-inlet channel height ratios lead to higher turbulence intensities and faster growth of the unstable shear layer. As a result of this, shorter normalized reattachment lengths occurred with lager expansion ratios. For all the expansion ratios studied, the mean reattachment lenght was uniform along the spanwise direction except very near the side walls.