Abstract
Expansion techniques have been used for many years to predict the response of un-instrumented locations on structures. These methods use a projection or transformation matrix to estimate the response at un-instrumented locations based on a sparse set of measurements. The transformation to un-instrumented locations can be done using modal projections or transmissibilities. Here, both expansion methods are implemented to demonstrate that expansion can be used for acoustic problems, where a sparse set of pressure measurements, say from a set of microphones in a cavity or room, are used to expand and predict the response at any location in the domain. The modal projection method is applied to a small acoustic cavity, where the number of active modes is small, and the transmissibility method is applied to a large acoustic domain, where the number of active modes is very large. In each case, expansion is shown to work well, though each case has its benefits and drawbacks. The numerical studies shown here indicate that expansion could be accurate and therefore useful for a wide range of interior acoustic problems where only sparse measurements are available, but full-field information is desired, such as field reconstruction problems, or model validation problems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have