Exergy and energy analysis of a wavy fin radiator with variously shaped nanofluids as coolants

Abstract

AbstractThe present study deals with the energy and exergy analysis of a wavy fin radiator deploying various shapes of Al2O 3‐water as nanocoolant. The effects of radiator effectiveness, pumping power, heat transfer rate, and performance index with variously shaped nanoparticles, mainly spherical, brick, and platelet, on coolant flow rates and air velocities have been investigated. Also, the impacts of entropy, second law efficiency, entropy generation number, and irreversibility on radiator performance analysis have been considered with steady‐state assumptions.Theoretical analysis revealed that the spherical particle–based nanocoolant showed 21.9%, and 18.2% higher effectiveness than platelet and brick nanocoolants. However, minimization in the entropy generation is observed in the platelet shape of the nanoparticle. The second law efficiency is 13% higher for the spherical nanocoolant compared with the brick nanocoolant. An optimum entropy generation number is found at a coolant flow rate of 13 l/min and then gradually decreases with an increase in the coolant flow rate. For all the considered operating parameters, the spherical nanoparticle showed a better performance than brick and platelet nanofluids as a radiator coolant. Due to the enhanced overall performance for the spherical nanofluid, it may be considered as a potential candidate for a radiator coolant.