Abstract
Currently, the traditional magnesium oxide production process is facing exceptional challenges arising from carbon emission restrictions and environmental protection. Waste bischofite pyrolysis has attracted much attention as a promising technology to address these challenges. Nonetheless, this process has primarily been demonstrated on a laboratory scale, with limited studies on an industrial scale. A comprehensive exergy analysis was conducted for the entire process and individual subunits within the pyrolysis process to identify potential areas for process enhancement. A FORTRAN subroutine based on empirical correlations of pyrolysis product yields was developed considering the impact of decomposition reactions on the simulation. Furthermore, the optimization of energy and exergy efficiency of the system was discussed in terms of the carbon dioxide emission factor, equivalence ratio, and pyrolysis temperature. The results show that the primary energy bottleneck lies in the combustion phase. In addition, the optimal energy and exergy efficiency conditions are a carbon dioxide emission factor of 5.3, an equivalent ratio of 1.15, and a pyrolysis temperature of 1100 °C. In comparison to the pilot-scale conditions, the energy efficiency and exergy efficiency increase by 2.55 and 3.61%, respectively. At this time, the MgO yield is 100%, and the HCl concentration is above 9.33%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
