Abstract
To simplify in-core instrumentation in a next-generation boiling water reactor (BWR), we study an ex-core nuclear instrumentation system. As a first step of this study, we focused on ex-core local power monitoring, which is especially difficult because neutrons inside a core cannot fly out of a reactor pressure vessel (RPV) due to shielding of fuel, water, etc., except when they are generated in the outer edges of the core. To resolve this, we created a local power monitoring method with neutron streaming pipes (NSPs). An NSP is a gas-filled pipe of size comparable to an instrumentation tube of an existing BWR. NSPs are axially inserted into the core. In-core neutrons are transported to the RPV through NSPs. The neutrons transmitted through the RPV are monitored with ex-core neutron sensors. We analytically evaluated the applicability of this NSP method for an advanced BWR (ABWR) with a three-dimensional BWR core simulator and the MCNP5 code. The ex-core neutron flux through the NSP was highly proportional to local power (1.0% of the residual standard deviation). The flux amount and the linearity gave feasible specifications for the ex-core neutron sensor in typical operation modes (pulse, Campbell, and current modes). Therefore, the NSP method is applicable to an ABWR.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.