Excimer laser coronary angioplasty: experience with a prototype multifibre catheter in patients with stable angina pectoris.

Abstract

Percutaneous excimer laser coronary angioplasty (ELCA) was performed in a first group of 20 patients with stable angina pectoris caused by significant coronary stenosis, and long-term follow-up was evaluated. Prototype 4 to 5.5 French multifibre catheters with 18-20 quartz fibres of 100 microns diameter, concentrically arranged around a central lumen for taking up a guide wire, were coupled to a commercial XeCl excimer laser. Energy was delivered at a wavelength of 308 nm with a pulse duration of 60 or 120 ns. Operating at a repetition rate of 20 Hz, mean energy transmission was 13.4 +/- 6.8 mJ per pulse. In all but one patient the lesion could be passed by the catheter. Percent diameter stenosis decreased from 77.1 +/- 10.8% to 53.1 +/- 11.8% after ELCA. Complications were frequently observed, intracoronary thrombus formation in eight instances, dissection in six patients and spasm in five cases, causing total vessel occlusion in five procedures. All complications could be managed efficaciously by thrombolytic and vasodilating drugs and/or balloon angioplasty. Subsequent PTCA was performed in case of complication or insufficient stenosis reduction after ELCA in 18 patients with adequate results (residual stenosis, 28.5 +/- 10.2%). Long-term follow-up angiography, which could be performed in 16 of 19 laser treatments, demonstrated significant restenosis in only three patients. Our preliminary results suggest that, using ELCA, ablation of atherosclerotic lesions is feasible in most cases. However, compared with PTCA, stenosis reduction is significantly less, and the acute complication rate is much higher. Thus, further improvements of the catheter system are necessary in order to realize the advantages of excimer laser ablation, which can be demonstrated by experimental studies.