Abstract
Excimer laser assisted re-oxidation for reduced, crystallized BaTiO3 thin films on Ni-foils was investigated. It was found that the BaTiO3 can be re-oxidized at an oxygen partial pressure of ∼50 mTorr and substrate temperature of 350 °C without forming a NiOx interface layer between the film and base metal foil. The dielectric permittivity of re-oxidized films was >1000 with loss tangent values <2% at 100 Hz, 30 mVrms excitation signal. Electron Energy Loss Spectroscopy indicated that BaTiO3 thin films can be re-oxidized to an oxygen stoichiometry close to ∼3 (e.g., stoichiometric). High resolution cross sectional transmission electron microscopy showed no evidence of NiOx formation between the BaTiO3 and the Ni foil upon excimer laser re-oxidation. Spectroscopic ellipsometry studies on laser re-oxidized [001]C and [111]C BaTiO3 single crystals indicate that the re-oxidation of BaTiO3 single crystals is augmented by photo-excitation of the ozone, as well as laser pulse induced temperature and local stress gradients.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.