Excellent Uniformity and Properties of Micro-Meter Thick Lead Zirconate Titanate Coatings with Rapid Thermal Annealing.

Abstract

Lead zirconate titanate (PZT) films have shown great potential in piezoelectric micro-electronic-mechanical system (piezo-MEMS) owing to their strong piezoelectric response. However, the fabrication of PZT films on wafer-level suffers with achieving excellent uniformity and properties. Here, we successfully prepared perovskite PZT films with similar epitaxial multilayered structure and crystallographic orientation on 3-inch silicon wafers, by introducing a rapid thermal annealing (RTA) process. Compared to films without RTA treatment, these films exhibit (001) crystallographic orientation at certain composition that expecting morphotropic phase boundary. Furthermore, dielectric, ferroelectric and piezoelectric properties on different positions only fluctuate within 5%. The relatively dielectric constant, loss, remnant polarization and transverse piezoelectric coefficient are 850, 0.1, 38 μC/cm2 and -10 C/m2, respectively. Both uniformity and properties have reached the requirement for the design and fabrication of piezo-MEMS devices. This broadens the design and fabrication criteria for piezo-MEMS, particularly for piezoelectric micromachined ultrasonic transducers.