Examining the antimicrobial efficacy of granulated tetraacetylethylenediamine derived peracetic acid and commercial peracetic acid in urban wastewaters.

Abstract

The ever-increasing need for access to safe water has meant that alternative water sources and innovative water reclamation approaches are often required to meet the global water demand. As a result, many wastewater treatment facilities have faced regulatory pressure to seek alternative disinfection methods that ensure public health safety, while adhering to regulations that set limits on carcinogenic disinfection by-products (DBPs). Peracetic acid (PAA) is an emerging wastewater disinfectant in the United States that has been widely used in other industries such as food sanitization and does not produce carcinogenic DBPs. However, several factors such as transport, storage, and physical and chemical effects have stymied its widespread use in wastewater markets. Therefore, the purpose of this study was to examine the antimicrobial efficacy of an on-site generated PAA compared against a commercially available PAA. Antimicrobial efficacy was assessed using standard fecal contamination indicators (i.e., total coliforms and Escherichia coli) in six urban wastewater treatment facilities ranging in size and treatment processes. Overall, few statistical differences were found between the antimicrobial efficacies of on-site generated PAA and commercially available PAA; however, before becoming more widely utilized, the on-site PAA should be tested against emerging fecal contamination indicators (e.g., human norovirus and enterovirus) and be assessed in terms of economic and sustainability impacts. PRACTITIONER POINTS: Alternative Ct approaches should be considered when using disinfectants like PAA. On-site generated PAA can achieve the same level of disinfection as commercial PAA. On-site generation of PAA may help further its use as a wastewater disinfectant.