Abstract
The road surface repair material of cold hardening type was tested for workability such as self-leveling, hardened properties, and hardening time for opening the traffic. The flow test was suitable for testing on self-leveling characteristics and the allowable flow time for the characteristic was 4 to 10 s and the handling time after mixing was 10 min at 20°C. The properties of hardened repair material were almost the same as those of a dense-grade hot asphalt mixture. The rutting resistance was superior to the dense-grade hot asphalt mixture. Flexural property and strength of this road repair material were satisfactory for bonding on the existing road surface. Its hardening time could be evaluated by using the durometer with semi-globular shape type of press needle and the hardness for early opening the traffic was approximately 85 at 60 min after finishing the repair work at 20°C.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of the Society of Materials Engineering for Resources
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
