Abstract

AbstractIn this paper, a coupled‐line‐based wideband four‐way filtering power divider (FPD) with unequal power division is presented. It is composed of three groups of coupled lines (CLs), four types of open‐ended stubs, and three kinds of resistors. By setting the CLs in each group with different parameters, unequal power distribution is obtained. Besides, open‐ended stubs with different characteristic impedances are inserted to each output port to generate two extra transmission zeros, at the same time maintaining good impedance matchings. Resistors are inserted to each group of the CLs to improve the isolations. By applying twice parity mode analysis, the exact synthesis of the proposed FPD is first derived. For demonstration, a prototype with power division ratio of 1:1.2:1.5:1.8 is designed and manufactured. Measurement results verified that more than 60% fractional bandwidth (FBW) is obtained under the criterion of 10 dB return loss and 10 dB isolation. Besides, the 3 dB passband FBWs for the four outputs reach 70% with high frequency selectivity and low insertion loss. And more than 15 dB out‐of‐band rejections are achieved for both the lower and upper stopbands.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.