Abstract
Different compaction conditions (water content and density) may induce various soil structures. The influence of these structures on small strain shear stiffness G seems contradictory and is not understood (e.g., denser specimens may have larger or smaller G than looser specimens after compression). Furthermore, the influence of compaction condition on stiffness anisotropy remains unclear. This study investigated the evolution of structure and anisotropic stiffness of saturated and compacted loess during isotropic compression. Specimens compacted at different water contents and densities were explored. The measured G was normalised by a void ratio function (f(e)) to eliminate density effects. Before yielding, G/f(e) increases with decreasing compaction water content and increasing density. These two trends are reversed at large stresses (2 to 3 times yield stress), implying that an initially softer structure becomes stiffer. Based on MIP, SM and SEM results, the trend reversal is likely because interparticle contacts are more strengthened and pores are more compressed in the initially softer specimens. Furthermore, the stiffness anisotropy becomes more significant with decreasing compaction water content and increasing density because of more orientated fabrics, as evidenced by the particle/aggregate directional distribution results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.