Abstract
Aluminum matrix composites reinforced by CoCrFeMnNi high entropy alloy (HEA) particulates were fabricated using the stir casting process. The as-cast specimens were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). The results indicated that flake-like silicon particles and HEA particles were distributed uniformly in the aluminum matrix. TEM micrographs revealed the presence of both the matrix and reinforcement phases, and no intermetallic phases were formed at the interface of the matrix and reinforcement phases. The mechanical properties of hardness and tensile strength increased with an increase in the HEA content. The Al 6063–5 wt.% HEA composite had a ultimate tensile strength (UTS) of approximately 197 MPa with a reasonable ductility (around 4.05%). The LM25–5 wt.% HEA composite had a UTS of approximately 195 Mpa. However, the percent elongation decreased to roughly 3.80%. When the reinforcement content increased to 10 wt.% in the LM25 composite, the UTS reached 210 MPpa, and the elongation was confined to roughly 3.40%. The fracture morphology changed from dimple structures to cleavage planes on the fracture surface with HEA weight percentage enhancement. The LM25 alloy reinforced with HEA particles showed enhanced mechanical strength without a significant loss of ductility; this composite may find application in marine and ship building industries.
Highlights
Metal matrix composites (MMCs) are replacing monolithic alloys in various structural and other applications, due to their enhanced properties, such as high specific strength, mechanical and tribological properties
Are metallic in nature, they will offer better wettability than the ceramic reinforcement. Considering all these advantages, CoCrFeMnNi high entropy alloy (HEA) particles were used as reinforcement in the present work, and LM25 Al alloy was taken as the matrix
Regarding the distribution of reinforcement it was observed that the HEA particles were nearly homogeneously distributed in all matrix, it was observed that the HEA particles were nearly homogeneously distributed in three different composite systems
Summary
Metal matrix composites (MMCs) are replacing monolithic alloys in various structural and other applications, due to their enhanced properties, such as high specific strength, mechanical and tribological properties. To overcome the above drawbacks and improve the structural properties of Al-based composites, a new reinforcement system with metallic elements was investigated [6]. Since all the elements in the HEA are metallic in nature, they will offer better wettability than the ceramic reinforcement Considering all these advantages, CoCrFeMnNi HEA particles were used as reinforcement in the present work, and LM25 Al alloy was taken as the matrix. The metal matrix composites were fabricated and synthesized through a bo pouring stir casting unit. The metal matrix composites were fabricated and LM25 synthesized a bottom forcement phase and commercially pure Al and alloy through were used as the matrix pouring stir casting unit.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
