Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling

Abstract

Abstract The evolution of the microstructure and mechanical properties of ultra-fine-grained and nanocrystalline Zn induced by ball milling at room temperature are studied systematically. The yield stresses measured from miniaturized disk bend tests and tensile tests are consistent with the microhardness results and generally increase with the decrease of average grain size. A dramatic decrease of hardness during milling from 1 to 3 h is a reflection of the increase of average grain size from 80 to 240 nm due to the initial unstable grain size and therefore, grain growth in this period. Young's modulus remains almost the same for samples milled for different times and is that for conventional grain size Zn. A transition from bending to membrane stretching is observed in the force–displacement curves for Zn ball milled for ≤18 h. The variation of transition strain with milling time could be related to the evolution of grain size distribution and therefore hardness during milling.