Abstract

Heat resistant, cast austenitic Fe-Ni-Cr-Nb-C alloy tubes are used by the petrochemical industry to transport hydrocarbons at temperatures between 850 and 1050 °C. Exposure to carbon from the process stream and nitrogen from the air causes severe carburization and nitridation in the tube walls, which influences creep resistance and degrades their ductility. A better understanding of these processes would enable their service life to be extended. To this end, we report the results of an experimental and computational study of the changes in microstructure and creep behavior in a representative alloy during service. The microstructure of the fresh material is compared to that of 8- and 10-year-old tubes. The results confirm the presence of M23C6, M7C3, and M2(CN) phases reported in prior studies, and also reveal the nucleation and growth of the carbo-nitride phase M6(CN). We show that the spatial variations of carbide and nitride particle volume fractions in aged tubes can be predicted by a simple reaction–diffusion equation. In addition, the uniaxial compressive creep response of the fresh and aged tubes was obtained as functions of temperature and strain rate. The materials deform by power-law creep, with strain rate versus stress relation as $$\dot{\varepsilon } = A\sigma^{n}$$. Aging reduces the stress exponent from n = 8 in fresh tubes to n = 5 in aged tubes, and also reduces the pre-exponential coefficient A. Tests on model alloys with composition identical to that of the matrix combined with finite element simulations of creep in model microstructures reveal that Cr depletion is responsible for the change in stress exponent, while the change in A is caused by the increase in particle volume fraction. By combining the microstructure-scale simulations of creep with the predictions of the reaction–diffusion model of microstructure evolution, the creep behavior of tubes left in service beyond 10 years is estimated.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call