Abstract
The evolution behavior of M7C3 carbides in a 90Cr18MoV martensite stainless steel during high temperature diffusion annealing treatments at temperatures near the solidus was investigated. Results showed that only M7C3 carbides dissolved, and the dissolution of large-sized M7C3 carbides was limited when the temperature was below the solidus. However, when the temperature was above the solidus, a certain amount of liquid phase appeared around the grain boundaries. Meanwhile, two different types of precipitates appeared within the grains. And these two types of precipitates were eutectic products that mainly consisted of M7C3 carbides and bcc phase, and divorced eutectic products that mainly consisted of M23C6 carbides, respectively. Thermodynamic calculations indicated that with the increase of Mn content, the Gibbs free energy of M23C6 carbides would be lower than that of M7C3 carbides. Thus, the difference in Mn content was the main reason for the formation of those two types of precipitates, i.e., M7C3 carbides were formed in regions with low Mn content and M23C6 carbides were observed in areas with high Mn content.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
